Mobile Power (SM-30)

Display: 5 LED lights
Operation: All-in-one menu button
Charge: Mirco-USB 5.40V± 0.05V
Discharge: USB mother seat + adapter
Work with Bluetooth headset and cellphones of iPhone/iPod/iPad, Nokia, Motorala, Samsung, Sony Ericssson, Blackberry and other mainsteam brands in the market

Technical Specifications:
Power Capacity: 3500mAh-5000mAh
Charging Mode: CC/CG
Input Voltage: 5.40V± 0.05V
Input Current: 800mA
Charing Time: 5-6h
Output Voltage: 5.40V± 0.05V
Maximam Output Current: 700mA for cellphones (Designed with current limiting resistor); 1000mA for iPad (Please use the original iPad USB cable)
Output Power: ≥ 95%
Operatiing Temperature: -10 to 50oC
Quiescent Current: 36uA (which means longer Industrial stand≤ 100uA)
Output Protection: When the battery voltage falls below 3.5V, the LED light (indicating the working condition) on the button will start blinking (2 times/second), which means the batteries will drain soon. When the voltage falls to 3.2V, the power bank will automatically shut down, the LED fight will be off. When the output voltage is above 1.5A or below 0.05A, the bank will automatically shut down.
Charging Indicates: The four LED lights around the power button indicate the power level in charging and discharging. They respectively correspond to 25%, and 50%, and 75%, and 100% from the left to right. They keep scrolling from the left to the right. When the power level reaches to 25%, the very left one will stop blinking, the same to the other 3. No output when charging.

Discharge Indicates: After power-on, the four a LED lights will blink from left to the right once, all on twice and then off. The LED light on the power button will keep blinking slowly. After connected to a device, the LED light will keep on for a second and then off for a second. Continuouslly press the power button twice, the LED light will keep on.
Power On: Press the power button for 2 seconds to power on. The four LED lights around the button will scroll once from the left to the right for auto check, then all on, off, on and off at last. only the LED on the button will keep blinking.
Power Off: Press the power button for 2 seconds to power off.
Current Power Display: After power-on, press the power button once, the corresponding LED light will blink 1 second and then off.

Fully Charging Mode: Connect the device to the power bank, press the power button twice to get into the fully charging mode. When the power bank is set to this mode, no matter it's connected to a device or not, it will not automatically shut down. This feature is mainly used for a device with a input current below 50mA (such as Bluetooth headsets).
Normal Charging Mode: If not in the fully charging mode, when the output is less than 30mA, the power bank will automatically shut down after 1 minute.